Commercial Garage Door - 20ga Grooved (R-16) • Garex

GX-175-20-G Series

The GX-175-20-G door is made of heavy 20 gauge steel. We can find the GX-175-20-G grooved steel door in commercial, industrial as well as agricultural environments.

The many possible combinations, customization and quality of materials and assembly are just some of the advantages of choosing Garex‘s GX-175-20-G commercial steel garage door.

See how this product can not only enhance the look of the building but most important, resist the bad weather and to intensive use.

 

The 20ga Grooved (R-16) Commercial Garage Door features:

    • R-16 urethane insulation:
    • High structural resistance ensures panel rigidity.
    • Insulation able to withstand Canadian winter conditions.
    • Double-lip door jamb seal and panel seals.
    • High-gauge anchor plates installed in every Garex door panel to ensure solid hinge attachment.
    • More rigid 3″ Industrial rails
    • 1 standard color of paint finish, possibility to have a door with custom paint finish
    • Features our composite End Block made from 100% recycled materials.

 

The 20ga Grooved (R-16) Commercial Garage Door Available Sizes:

Garex can manufacture the GX-175-20-G grooved steel garage doors up to 20 ft (6,10 m) wide and up to 24 ft (7,32 m) high.

All of our doors can be assembled with panels of 45, 53 and 60 cm (18, 21 or 24 inches).

Contact us to learn more and to order your GX-175-20-G steel commercial garage door today !

Color

RANGE OF COLOURS

The GAREX selection of colours are from oven-baked polyester based paints and meet high quality standards. Colours shown may differ from the actual colours of the doors. Request a color sample by mail.

Steel door

  • White

    White

  • Personalized Colors

    Personalized Colors

Patterns

  • Grooved

    Grooved

  • Woodgrain

    Woodgrain

Technical informations

Technical specs

DESCRIPTION
OF COATING
STEEL 20 ga
Metal thickness 0.89 mm (0.035 po)
Isolation factor RSI 2.81 (R-16)
Isolation density 40 kg/m3 ( 2.5 lbs/pi3 )
Door Thickness 44.5 mm (1 3/4″)

OPERATOR CONFIGURATION

No matter the available space for installing the opening mechanism, GAREX will custom-manufacture the system to suit your environment.
Standard – Sloped Roof – High LIft – Low Headroom – Full Vertical Lift

 

HARDWARE

All hardware is mounted in proportion to door weight and frequency of use.
Garage Door:

LIGHT COMMERCIAL

Less than 400 lb (181 kg)
Operated fewer than 50 cycles/day.

HEAVY-DUTY COMMERCIAL

400 lb to 599 lb (181 kg to 271 kg)
Operated more than 50 cycles/day.

INDUSTRIAL

More than 600 lb (272 kg)
Operated very frequently.

 

STANDARD CHARACTERISTICS

  • 13- or 12-gauge rigid industrial steel tracks.
  • 14, 13- or 11-gauge steel hinges.
  • Double hinges on doors over 12 feet wide (3,96 m).
  • Crossbar installed for doors over 13 feet wide or more.
  • Steel cap on doors 28 feet (8,53 m) wide or more (or 400 sq. ft.)

 

TAKING MEASUREMENTS

Taking the garage door dimensions is needed to install your new garage door. At Garex, a professional will come to your location for free to handle this step. Alternatively, refer to the guide to learn how to take your measurements before visiting your dealer.

» Download the measurement guide

Documentation and maintenance