Commercial Garage Door - Full View (panoramic) • Garex

GX-175-FV Series

Bring natural light into your space with the full view (panoramic) commercial GX-175-FV garage door by Garex. This door features a large window in a variety of finishes, allowing for optimal outdoor brightness and a pleasant interior. The GX-175-FV is perfect for use in restaurants, car washes, and as an interior partition wall. Not only does it enhance the look of your building, but it is also built to withstand bad weather and heavy use.

The Full View Commercial Garage Door features:

  • Aluminum extrusion
  • Several choices of glass finish
  • More rigid industrial rails
  • 3 colors of paint finish, possibility of custom paint finish
  • Kick-proof panels available

The Full View Commercial Garage Door Available Sizes:

Garex can manufacture the full view GX-175-FV commercial garage doors up to 24 ft (7,32 m) wide and up to 18 ft (5,49 m) high.

All of our doors can be assembled with panels of 45, 53 and 60 cm (18, 21 or 24 inches).

Contact us to learn more and to order your full view GX-175-FV commercial garage door today !

Color

RANGE OF COLOURS

The GAREX selection of colours are from oven-baked polyester based paints and meet high quality standards. Colours shown may differ from the actual colours of the doors. Request a color sample by mail.

MOLDINGS

  • White

    White

  • Black

    Black

  • Clear anodized

    Clear anodized

  • Personalized Colors

    Personalized Colors

CUSTOM COLOR

If you require a non-standard color, we can paint your door to the color of your choice (equivalence Sico or Gentek).

GLASSES

The vertical mullion location and the glazed section height can be modified to fit the desired architectural aspect.

  • CLEAR GLASS

    CLEAR GLASS

  • FROSTED GLASS

    FROSTED GLASS

  • GREY TINTED GLASS

    GREY TINTED GLASS

  • MIRRORED GLASS

    MIRRORED GLASS

  • BRONZE TINTED GLASS

    BRONZE TINTED GLASS

Technical informations

Technical specs

Metal thickness 1,73 mm (0,068”) Aluminum – Alloy 6063 T5
Door thickness 44,45 mm (1 3/4”)
Thermos thickness 18,5 mm (0,71”)
Mullion width 40,64 mm (1,6”)
Reinforcement Moulding Doors 14′ and above (4,26 m)
Double hinge Doors 14′ and above (4,26 m)
Double top and bottom Doors 15′ and above (4,57 m)
T-Reinforcement Doors 17′ and above (5,18 m)

OPERATOR CONFIGURATION

Garex can configure a door operator to fit the available space. Standard High Ceiling Full Vertical Lift Limited Space Roof Slope

HARDWARE

All hardware is mounted in proportion to door weight and frequency of use.
Garage Door:

LIGHT COMMERCIAL

Less than 400 lb (181 kg)
Operated fewer than 50 cycles/day.

HEAVY-DUTY COMMERCIAL

400 lb to 599 lb (181 kg to 271 kg)
Operated more than 50 cycles/day.

INDUSTRIAL

More than 600 lb (272 kg)
Operated very frequently.

 

STANDARD CHARACTERISTICS

  • 13- or 12-gauge rigid industrial steel tracks.
  • 14, 13- or 11-gauge steel hinges.
  • Double hinges on doors over 12 feet wide (3,96 m).
  • Crossbar installed for doors over 13 feet wide or more.
  • Steel cap on doors 28 feet (8,53 m) wide or more (or 400 sq. ft.)

 

TAKING MEASUREMENTS

Taking the garage door dimensions is needed to install your new garage door. At Garex, a professional will come to your location for free to handle this step. Alternatively, refer to the guide to learn how to take your measurements before visiting your dealer.

» Download the measurement guide

Documentation and maintenance